INSTALLATION METHOD
COOLSNAP PAD INSTALL HOME AIR-CONDITIONING
COOLSNAP PDA installation separate air-conditioning method:
Separate air-conditioning usually has two pipelines, one is the high-pressure pipeline and the other is the low-pressure pipeline, and the low-pressure pipeline is thicker than the high-pressure pipeline.
The COOLSNAP PDA is directly installed on the high and low voltage pipelines in a wrap-around manner, and can be tied tightly with a tie.If there are wires, they can also be wrapped together.
Please pay special attention if the air-conditioning drainage pipeline is combined with high and low-pressure pipelines, please avoid the drainage pipeline to avoid the drainage pipeline being blocked after the strap is tied, which may cause the air-conditioning to leak water.
COOLSNAP PDA installation window type or separate type air-conditioning indoor unit:
Use a paper clip to pass through the holes on both sides of the COOLSNAP PDA, and then remove the filter of the air conditioner.
You can see the heat sink fins at the back, and fix the COOLSNAP PDA by inserting the upper and lower paper clips directly into the gaps of the heat sink fins in an upright manner.
COOLSNAP RING INSTALLTAION LOCATION
Install the COOLSNAP RING to the air-conditioning position of the car:
First find out the two air-conditioning pipelines on the car's air-conditioning, a high-pressure pipeline (the pipeline will be marked with H), and a low-pressure pipeline (the pipeline will be marked with an L).The same low-pressure pipeline will be thicker than the high-pressure pipeline.
Two large COOLSNAP RING are directly buckled on the low-pressure pipe and the smaller one is directly buckled on the high-pressure pipeline.
If you find that the pipeline is too thin, you can use a strap to strengthen the fixation.
COOLSNAP RING is installed to the position of the automobile oil pipe:
First you need to find the tubing that will be injected into the engine.
Install the two cold speed energy rings close to the engine, the closer the distance to the engine, the better.
Usually the oil inlet pipeline is difficult to find. It is recommended to find a professional car repairer to help install it.
If there are several oil inlet pipes, several sets (two sets of COOLSNAP RING) must be installed.
在此輸入您的文字…